AUDIX DP4 PROFESSIONAL 4-PIECE DRUM / PERCUSSION / INSTRUMENT MICROPHONE PACKAGE

AUDIX DP4 PROFESSIONAL DRUM AND PERCUSSION MIC PACKAGE

The DP4 is a perfect complement of dynamic microphones for close miking of a variety of sources on-stage or in the studio. Included in the DP4 microphone package are the D6, Audix’s flagship dynamic kick drum microphone, and three i5s, Audix’s best-selling instrument microphone. Also included are three DFLEX mic mounts for easy attachment to a wide variety of instruments. All microphones and clips are conveniently packaged in a foam-lined aluminum carrying case for travel and safekeeping when the microphones are not in use. The case also features three additional expansion slots for vocal microphones.

The D6 for kick drum and the i5 for snare and toms are considered must haves for every drummer. The kick and snare are considered the core of any drum kit and the foundation for every groove. If either the kick or the snare is unable to be heard, there is simply no groove and close miking insures that they will be captured in the mix. Being high SPL dynamic microphones, the D6 and i5 excel at “close miking”. This miking technique captures the attack and percussive sound of the drum. Also, by having the mic close to the source of the sound, it helps to isolate and control the sound of each drum. On toms the i5 provide a clear accurate signal and the cardiod pattern allows you to use one mic between two rack toms if inputs are at a premium

-

WHAT'S IN THE BOX:

- 3 x i5 Snare Drum Microphones

- 1 x D6 Kick Drum Microphone

- 3 x MC1 Microphone Clips

- 3 x DFLEX Mounts

- 1 x DCLIP Microphone Clip

- Aluminum Road Case

-

SPECIFICATIONS:

i5:

- Transducer : Dynamic VLM Type B

- Frequency Response : 50 Hz - 16 kHz

- Polar Pattern : Cardioid 

- Output Impedance : 150 ohms

- Sensitivity : 1.5 mV / Pa @ 1k

- Maximum SPL : =140 dB 

- Off-axis rejection : =23 dB

- Power Requirements : None

- Materials / Finish : Die Cast Zinc Alloy / Black E-coat

- Weight : 250 g / 8.8 oz

D6:

- Transducer : Dynamic VLM Type E

- Frequency Response : 30 Hz - 15 kHz

- Polar Pattern : Cardioid 

- Output Impedance : 280 ohms

- Sensitivity : .8mV / Pa @ 80 Hz

- Maximum SPL : =144 dB 

- Off-axis rejection : =20 dB

- Power Requirements : None

- Materials / Finish : Machined Aluminum / Black E-coat

- Weight : 255 g / 9 oz

-

*The full manufacturer's warranty is only valid through us.