RADIAL ENGINEERING JCR STUDIO REAMPER 1-CHANNEL PASSIVE REAMPER W/BOX #1473616

Up for sale a Radial Engineering JCR Studio Reamper 1-Channel Passive Reamper w/Box - #1473616!  We are an Authorized Dealer of Radial Engineering!  This item is an Open Box in Mint Cosmetic Condition and it comes with the Full Manufacturer's Warranty*.  On this one, there are few fine scratches, marks and few other imperfections here and there (see 7th to 12th pictures), but absolutely nothing major.  Also, the box is slightly damaged (see 6th picture).  Unit comes with its User Guide in its Original Box.

-

RADIAL ENGINEERING JCR STUDIO REAMPER

Original Reamp Circuit

The Reamp JCR is a passive Reamper that allows you to take a prerecorded track and send it back to a guitar or bass amplifier and re-record it. The benefits are tremendous: instead of worrying about the sound of the track, you can focus your attention on getting the best musical performance. Once the magic has been captured, you can send the guitarist home and Reamp the track at will as you move the mics around the room, try various amplifiers or introduce effects. Best of all, you can Reamp the track later as the production develops.

-

FEATURES:

- Lets you re-record tracks through a guitar or bass amp

- Original Reamp circuit designed by John Cuniberti

- Plug and play easy to use passive design

- Improves productivity while expanding creative options

-

SPECIFICATIONS:

Audio circuit type : Passive, transformer isolated

Frequency response : 20Hz ~ 20kHz (+0dB/-1dB)

Dynamic range : 140dB

Total harmonic distortion : 0.001% @ 1kHz/0dBu input

Intermodulation Distortion : 0.0025% @ 1kHz/-10dB input

Phase Deviation : 2 degrees @ 100Hz; 0º @ 800Hz

Input Impedance : 1800 Ohms

Output Impedance : 4.8k Ohms

Common Mode Rejection Ratio : -55dB @ 55Hz

Noise : -115dBu

Maximum Input : +26dBu

180° polarity reverse, Ground lift, HPF, LPF, Level Control

Input Connectors : /4" TRS, XLR

Output Connectors : 1/4" unbalanced

Construction: 14-gauge steel chassis & outer shell

Size (L x W x D): 3.3" x 5.0" x 2" (84 x 127 x 48mm)

Weight : 1.32lb (600g)

Shipping size (L x W x D) : 4" x 3" x 6.5" (102 x 76 x 165mm)

Shipping weight : 1.85lb (840g)

Power : Passive, no power required

Conditions : For use in dry locations only between 5°C and 40°C

-

*The full manufacturer's warranty is only valid through us.