ROLAND DJ-707M

Make Sure It Bumps—Without Any Bumps
The DJ-707M leverages the DSP of Roland’s digital audio consoles to ensure you deliver the loudest, cleanest sound possible—whether it’s with your own PA system or the one already at the venue. Whatever the gig, your clients will remember great sound thanks to features that handle the unexpected, like laptop crashes, surprise guest performers, videographer feeds, and painful audio challenges such as feedback.

Scene Presets
Using the 10 onboard scenes, you can create ‘go-to’ event settings for audio routing, loudspeaker management and system setups—and recall them instantly. Scenes are a huge timesaver for standard event configurations, letting you switch settings for your different speaker systems and recall custom setups for venues where you play regularly.

Loudspeaker Management x3
Master, booth, and zone outputs all have independent loudspeaker management settings, including four-band EQ, multiband compression, limiter, and mono mode. It’s like having three speaker management processors built into one unit.

Anti-Feedback
Feedback at a gig is dangerous as it can ruin a special speech or even plague the whole event. Built-in feedback suppression listens out for feedback—and even anticipates it—before adjusting the speaker output automatically.

Dual USB Ports
Connect two computers at once for a backup laptop connection or seamless DJ changeover. The USB B port also works as a standard USB audio interface.

Inputs for Guest Performers
When an event includes a guest musician or performer, you can easily plug them into the front-facing dual 1/4-inch jacks or 1/8-inch stereo aux input without disrupting your DJ configuration.

Zone Output
The fully assignable zone output with dedicated level control is ideal for creating a separate mix for a videographer, sending different music to another area of the venue, or even adding a subwoofer.

Size That Doesn’t Sacrifice Performance
The compact DJ-707M is packed with more specifications than bulkier controllers that don’t fit in tight DJ booths and are hard to transport without an equipment van.

Built to Last
You can’t work if your DJ controller isn’t working. Which is why the DJ-707M is built for life on the road, with rugged, reinforced metal parts both inside and out.

The Right Size for DVS
The DJ-707M’s size fits perfectly between turntables and DJ media players. And it’s Serato DVS Upgrade Ready, so you can use it as the ultimate mobile DJ mixer with your component setup.

Signal Processing
Sampling Frequency = 48 kHz

Scene Memory
10

Internal Effect
Mic Effects
Channel Effects
Output Equalizer
Output Multiband compressor

Nominal Input Level
INPUT (1–4) (RCA phono type, LINE): -12 dBu
INPUT (1, 2) (RCA phono type, PHONO): -39 dBu
MIC IN (1, 2) (XLR type): -60 dBu
AUX IN (1/4-inch TRS phone type, AUX): 0 dBu
AUX IN (1/4-inch TRS phone type, MIC): -40 dBu
AUX IN (Stereo miniature phone type): -6 dBu

Nominal Output Level
MASTER OUT 1: +6 dBu (balanced)
MASTER OUT 2: +0 dBu
BOOTH OUT: +6 dBu (balanced)
ZONE OUT: +0 dBu

Input Impedance
INPUT (1–4) (RCA phono type): 47 k ohms or greater
MIC IN (XLR type): 7 k ohms or greater
AUX IN (1/4-inch TRS phone type, AUX): 30 k ohms or greater
AUX IN (1/4-inch TRS phone type, MIC): 7 k ohms or greater
AUX IN (Stereo miniature phone type): 10 k ohms or greater

Output Impedance
MASTER OUT 1: 600 ohms (balanced)
MASTER OUT 2: 1 k ohm (unbalanced)
BOOTH OUT: 600 ohms (balanced)
ZONE OUT : 1 k ohm (unbalanced)
PHONES: 44 ohms

Frequency Response
48.0 kHz: 20 Hz–22 kHz (+0/-2 dB)

Display
16 characters, 2 lines (backlit LCD)

Connectors
INPUT (1–4) jacks: RCA phono type
MIC IN (1, 2) connectors: XLR type
AUX IN jacks: 1/4 inch TRS phone type, Stereo miniature phone type
MASTER OUT 1 connectors: XLR type (balanced)
MASTER OUT 2 jacks: RCA phono type
BOOTH OUT jacks: 1/4
inch TRS phone type (balanced)
ZONE OUT jacks: RCA phono type
PHONES jacks: Stereo 1/4 inch phone type, Stereo miniature phone type
PC (A, B) ports: USB B type
MIDI OUT connector
DC IN jack
PHONO GROUND terminal

Power Supply
AC adaptor

Current Draw
2,000 mA

Accessories
Startup Guide
Leaflet "USING THE UNIT SAFELY"
AC Adaptor
Power cord
USB cable

Width
474 mm
18-11/16 inches

Depth
331 mm
13-1/16 inches

Height
73 mm
2-7/8 inches

Weight (excluding AC adaptor)
3.5 kg
7 lbs 12 oz