KEMPER PROFILER POWER HEAD + REMOTE

Both the Rack and the Head are available with a built-in Class D power amp. It produces 600 Watt @ 8 Ohm or 300 Watt @ 16 Ohm. The power amp was designed in Denmark by the renowned IcePower. It offers pristine sound quality, whether it is driving linear speakers or classic guitar speaker cabinets.

The Class D technique makes for the most energy-efficient power amp solution, emitting only a minimum of heat. This reduces the need for heat-sinks, as well as minimising the overall size and weight. Combining this power amp with the Kemper Profiler turns the PowerHead and the PowerRack into a super smart, compact, all-in solution. The PowerHead weighs in at a little over 6kg.

If required, you can switch off the built-in power amp, converting your powered Profiler into a line-level unit for recording purposes.

THE KEMPER PROFILER
The Kemper Profiler is the leading-edge digital guitar amplifier and all-in-one effects processor.

Hailed as a game-changer by guitarists the world over, the Profiler is the first digital guitar amp to really nail the full and dynamic sound of a guitar or bass amp. This is made possible by a radical, patented technology and concept which we call "Profiling".

For decades, the electric guitarist has been shackled to the tube amplifier as the only means of achieving "that sound". The combination is undoubtedly glorious, but far from ideal - achieving consistent results between practice room, studio and stage presents a significant challenge to guitarists, just as it has since the early 1940s.

PROFILING
With the advent of the Kemper Profiler, everything has changed. For the first time in history, guitar players are free to create their most individual tones -tones that reflect the very essence of their playing style- and then capture them exactly into the digital domain with Kemper's unique technology.

Profiling is the key!

THE BEST AMPS IN THE WORLD
Feel like you don't have any tube amps worth profiling? No problem!
The Profiler ships with hundreds of amps and Rigs already installed, profiled by professional musicians and engineers that hail from some of the world’s top studios. In addition to that you can access and explore another couple hundreds of Rigs preinstalled in our RigManager software. This premier selection of factory Rigs grants you access to the rarest and finest amps on the planet.

We are constantly refining, updating and extending our free-to-use libraries by fine-tuning the existing catalog and by adding brand new licensed content. Our goal is to allow our users to enjoy the full spectrum of guitar culture and heritage, with a vast range of profiles available even within each genre.

WHERE DO YOU PLAY?
RECORDING STUDIO
The Profiler revolutionizes the typical workflow of a recording session. Guitarists can now move freely between projects, as taking profiles of any guitar rigs they use allows them do overdubs or alternative takes whenever they like. You could rent a professional studio for a day or two to create the best profiles of your amps, and then record in your project studio later - you'll have the exact sound of the professional studio, but with all the time in the world.

Think reamping … Imagine you're working on the final mix of an album - wouldn't it be great to reamp tracks with the exact same sound and response, without having to rebuild the entire recording setup for each song?

ON STAGE
Playing live is where the Profiler really comes into its own - all the time and effort you put into making profiles in the studio means you can now play live with the exact same sound that you used on your blockbuster hit, only without the need for multiple amp setups on stage. You will sound better than ever before through the PA.

Since the sound of the cabinet you mic’ed in the studio is immortalised in the profile, there is no need to mic a speaker cab on stage. In fact, you don't have to carry a cabinet up on stage at all! You can monitor yourself via the common stage-monitor wedge, and save a lot of backache and cargo costs. Not to mention your band mates (and mixing engineer), who might just love you for leaving this very loud sound source at home!

Of course, you might still be drawn to the raw energy that a real speaker cabinet can bring to the rehearsal room and live stage. The Kemper Profiler is well prepared for this as well - you can still drive a speaker cabinet by either a solid-state or tube power-amp, fed by the Profiler’s monitor output. For ultimate convenience, our 'powered' Profiler versions are equipped with a built-in Class D amplifier with up to 600W output. To prevent the amp sound going through two speaker cabinets in a row, the virtual cabinet can be switched off for the monitor output, while remaining active for the main outputs feeding the PA.

Now, as the speaker cabinet is only being used as your personal monitor, you can adjust your volume on stage independently, without affecting the signal volume going to front-of-house.

AT HOME
Let's face it - rocking-out at home is difficult for most of us. Analog tube amps only start to sing at levels where the only neighbors who’ll enjoy your 10min rock’n’roll extravaganza will be the ones who live half-a-mile away! The Profiler, however, sounds great at any level.

Play it through your home stereo or through headphones. Use the dedicated ‘Space’ effect to make headphones a more pleasurable experience, and to reduce ear fatigue. Play along to your favourite music by connecting your MP3 player to the auxilliary in, and then mixing it with the amp signal

REMOTE
DESIGNED TO WORK SEAMLESSLY WITH PROFILER
Profiler Remote is the quintessential foot controller for your Profiler. We’ve spent a tremendous amount of time to create a versatile and yet easy to operate floor board. The tight integration in between Profiler and Remote allows you to control, administer and program without any knowledge about MIDI or delving through cryptic data sheets.

The large, illuminated display is designed to be looked at from a distance and Remote's housing is built like a tank. Just what the doctor orders for touring musicians on dark stages.

Five buttons allow you to directly access five different programs ("Rigs") and entire performance programs can be switched using a bank system. There are dedicated buttons to access the tuner, tap tempo in and enable the new, exclusive Looper Effect.

Remote connects via a single Ethernet cable to your Profiler. No extra power supply is required and the included cable is 7 meters long (21ft). Longer cables are possible as well.

Up to four continuous foot pedals can control multiple parameters inside your Profiler. Four buttons switch of stomps and effects. The programming required is easier to learn than putting a new contact into your cell phone. Click to choose, assign, done.

THE LOOPER
There is something magic about loopers. Doesn’t matter if you use them to create layered worlds of sound or to rehearse the complex middle-8 of your last composition.

With a single click on a button, Remote turns into a fully fledged Looper control station. Loops can be recorded, overdubbed and deleted by using the buttons on the board. You can reverse, halftime and undo takes. The maximum duration of a loop is thirty seconds. The Looper is exclusively available to Remote users.

PROGRAMMING REMOTE
Four buttons, which can be assigned individually for every program, can control multiple stomp effects at the same time. In order to associate an effect with a button, all you need to do is: Press a stomp button on your Profiler and hold the button of your choice on Remote at the same time. Done.

MADE WITH TOURING IN MIND
Remote connects to Profiler with a single cable. We are using a Neutrik® etherCON® connector to ensure the most robust connection possible on stage. By using a powered ethernet hub, distances in excess of 100 meters (300ft) can be bridged with a simple Ethernet cable.

CONTROLLERS AND SWITCHES
The four TRS connectors on the rear panel can be used for continuous controllers and switches. Each controller can be freely assigned per program. Multiple assignments per controller are also possible. Status color LEDs give you a great overview on assignments and purpose of a switch/pedal."

ADMINISTER OTHER EQUIPMENT
Remote allows you to control external MIDI gear by sending program change messages utilizing the MIDI output of your Profiler.