SPL GAINSTATION 1

GainStation1
The GainStation 1 is the premium recording front end, ensuring that any microphone and instrument signal is pre-amplified with the highest quality.

The quality of your recordings has a major influence on the subsequent mixing process – good recordings require less processing in later stages. Improved transparence and understandability can be achieved with less equalization and compression if the signals are recorded optimally, often allowing individual signals to be mixed at lower levels without compromising their presence.

Sonic Excellence
This cutting-edge technology ensures that signals recorded with the GainStation 1 have more presence and substance and will easily cut through a mix even at lower levels.

Extremely low-frequency signals are tight and transparent with clear intonation. Percussive transients are interpreted more precisely, which leads to a clearer rhythmic content and in turn a more solid rhythmic performance and perception.

60V DC Audio Rail
The GainStation1 Class-A preamplifier stages are based on proprietary discrete op-amps operating on a 60V rail.

That doubles the voltage of traditional preamplifier designs, resulting in a superior 130dB dynamic range and an extraordinarily alive, detailed image.

Clean Gain
The first amplification stage is the Clean Gain stage, so-called because this is an extremely fast Class-A stage exclusively built with discrete 60V rail op-amps. This stage is designed to capture the pure sound as is.

Tube Gain
The GainStation 1 offers effective sound-shaping capabilities most notably via the tube stage, which can be completely bypassed or continuously added to the Class-A preamp circuit, allowing everything from subtle warmth to a noticeable tube saturation effect.

Peak & FET Limiters
The pre-output stage Peak and/or FET mode limiters can be used to protect an AD converter from clipping, or for example to add punch to drum tracks, which in turn reduces or in many cases even eliminates the need for subsequent compression.

Mic Input Impedances
The GainStation 1 offers three input impedances to perfectly match the preamplifier to the microphones. The mic impedances are 200 Ohms, 1,2 & 10 kOhms.

Features

• Separated Class-A and tube preamps.
• Tube saturation from subtle to brutal
• A tube stage utilizing premium MKP foil condensers and a select 12 AX7 LPS tube for clear, dynamic audio
• Peak/FET Limiter
• Polarity Reversal
• 48-volt phantom power,
• LED level indicators.
• Switchable Mic Input Impedance (200 Ohms, 1,2 & 10 kOhms)
• Custom-made, fully discrete, Class A op-amps
• 60V DC Audio Rail operating voltage—twice as high as most common op-amps—for an extended dynamic range.